A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Influence of compliance for an elastokinematic model of a proposed rear suspension

The research is carried out to improve passenger’s comfort to increase the vehicles stability in dynamic conditions. The literature available in the automotive engineering considers different topics for studying suspensions. An example represents mechanisms structure and analysis (synthesis, kinematics, and dynamics) under various operating conditions. These aspects have been approached before analytically, numerical. The current paper studies the influence of the lateral force on the contact patch of the wheel and the corresponding variations of vehicle stability parameters, such as camber angle and wheel rear track. The study is performed for a newer innovative rear suspensions mechanism which does not have a wheel track and camber angle variation, relative to the chassis, when the suspension components was considered rigid. A numerical solution is obtained through a virtual model on several commercial codes: MSC Adams, Patran, Nastran. Concerning the analysed parametes, their variation increases as the applied force is increased. Moreover, the largest variation corresponds to the case were elastic bushings and deformable links are considered.     

Activity patterns,time use,and travel of millennials: a generation in transition?

Millennials, defined in this study as those born between 1979 and 2000, became the largest population segment in the United States in 2015. Compared to recent previous generations, they have been found to travel less, own fewer cars, have lower driver’s licensure rates, and use alternative modes more. But to what extent will these differences in behaviour persist as millennials move through various phases of the lifecycle? To address this question, this paper presents the results of a longitudinal analysis of the 2003–2013 American Time Use Survey data series. In early adulthood, younger millennials (born 1988–1994) are found to spend significantly more time in-home than older millennials (born 1979–1985), which indicates that there are substantial differences in activity-time use patterns across generations in early adulthood. Older millennials are, however, showing activity-time use patterns similar to their prior generation counterparts as they age, although some differences – particularly in time spent as a car driver – persist. Millennials appear to exhibit a lag in adopting the activity patterns of predecessor generations due to delayed lifecycle milestones (e.g. completing their education, getting jobs, marrying, and having children) and lingering effects of the economic recession, suggesting that travel demand will resume growth in the future.     

Incorporating sustainability assessment in transportation planning: an urban transportation vehicle-based approach

Environmental assessments are on the critical path for the development of land, infrastructure and transportation systems. These assessments are based on planning methods which, in turn, are subject to continuous enhancement. The substantial impacts of transportation on environment, society and economy strongly urge the incorporation of sustainability into transportation planning. Two major developments that enhance transportation sustainability are new fuels and vehicle power systems. Traditional planning ignores technology including the large differences among conventional, hybrid and alternative fuel vehicles and buses. The introduction of alternative fuel vehicles is likely to change the traditional transportation planning process because different characteristics need to be taken into account. In this study a sustainability framework is developed that enables assessment of transportation vehicle characteristics. Identified indicators are grouped in five sustainability dimensions (Environment, Technology, Energy, Economy and Users). Our methodology joins life cycle impacts and a set of quantified indicators to assess the sustainability performance of seven popular light-duty vehicles and two types of transit buses. Bus Rapid Transit receives the highest sustainability index and the pickup truck the lowest. Hybrid electric vehicles are found to have the highest sustainability index among all other passenger vehicles. A sensitivity analysis shows the proposed sustainability dimensions produce robust sustainability assessment for several weighting scenarios. The results are both technology and policy sensitive, thus useful for both short- and long-term planning.     

The Demise of a Tropical Coastal Lagoon as Breeding Habitat for Ground-Nesting Waterbirds: Unintended,but Anticipated Consequences of Development

Laguna Cuyutlán (Colima, Mexico), an Important Bird Area, used to provide breeding habitat for ground-nesting waterbirds. During 2014 and 2015, nesting efforts of laughing gull, black skimmer, and royal, gull-billed and Forster's terns failed almost completely due to inundation, while least terns and snowy plovers fared the same during 2014. No anomalies in rainfall, tidal level, or coseismic subsidence explained such failure. Rather, the inundations were due to the enlarging of Canal Tepalcates that connects the lagoon with the sea, which was widened from 100 to 300 m and dredged to 17-m deep. Before this, the hydrodynamics were regulated by evaporation and runoff. Now, increased seawater volumes dominate the basin's hydrodynamics. The failure of Laguna Cuyutlán as a breeding habitat for these birds is an important threat for these species, as this lagoon held one of the < 20 colonies known for several of these species along the western coast of North and Central America. Documenting this demise of Laguna Cuyutlán for ground-nesting waterbirds transcends the regional scale as it emphasizes the little consideration still given to biodiversity vs. economic development, and is a warning for coastal projects in other developing areas of the world.     

Estimating travel time functions for urban roads: options and issues

Travel time functions specify the relationship between the travel time on a road and the volume of traffic on the road. Until recently, the parameters of travel time functions were rarely estimated in practice; however, a compelling case can be made for the empirical examination of these functions. This paper reviews, and qualitatively evaluates, a range of options for developing a set of travel time functions. A hierarchy of travel time functions is defined based on four levels of network detail: area, corridor, route and link. This hierarchy is illustrated by considering the development of travel time functions for Adelaide. Alternative sources of data for estimating travel time functions are identified.

In general, the costs and benefits increase as the travel time functions are estimated at finer levels of network detail. The costs of developing travel time functions include data acquisition costs and analysis costs. The benefits include the potential for reducing prediction errors, the degree of application flexibility and the policy sensitivity of the travel time functions.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Measuring community reaction to urban transportation impacts using Von Neumann‐Morgenstern utility theory

This paper attempts to measure the impacts of urban transportation system improvements or changes on the community. The community's perceptions of the impacts are represented by its utilities (or disutilities) over various ranges of values of the multiple attributes representing these impacts. The utility technique used in the evaluation is based upon von Neumann‐Morgenstern (vN‐M, 1947) Utility Theory, and is applied using Raiffa's (1970) Fractile Method.

The paper specifically applies the technique to model the perceptions of five subgroups within a community to the impact of a new light rail transit system that is being incorporated in the transportation system of the City of Calgary.

Results of the modeling indicate explicitly how the community changes its perception over ranges of values of the attributes evaluated. Biases of various subgroups within the community over these attributes are also shown. Statistical tests indicate that aggregated utility perceptions can represent the utility perceptions of the individual subgroups quite reasonably.     

Energy conservation and intercity freight transport

In this paper, the characteristics of intercity freight modal operations are investigated to evaluate the potential for achieving energy savings. It is determined that the greatest opportunities for conserving energy appear to rest with achieving modal shifts and operational improvements in truck and rail transport. To test this hypothesis, intercity truck and rail freight operations are analyzed to determine the relationships between energy consumption and the delivery of transport service. The energy consumption impact of alternative conservation measures are calculated, and in turn, evaluated in light of a series of institutional constraints. As such, this study goes beyond the characteristic cataloging of alternative energy conservation measures by conducting a disaggregated assessment of the effectiveness and feasibility of implementing such measures. This paper concludes that the potential for achieving energy conservation in the movement of intercity freight in general, and by truck and rail systems in particular, is limited, as well as shrouded by the complexity of the nature of the commodity itself, the commodity flow characteristics, and the market and institutional structure.     

Direct resolution of the pitch of DNA on positively charged lipid bilayers by frequency-modulation AFM

High resolution structural studies of DNA and DNA binding proteins by atomic force microscopy (AFM) require well-bound samples on suitably flat substrates. Adsorbing the DNA onto a positively charged supported lipid bilayer has previously been shown to be a potentially effective strategy for structural studies with AFM. Here, using our home-built frequency-modulation AFM (FM-AFM), we show that these bilayer substrates are only maximally effective for high resolution AFM when the samples are short, linear DNA, compared with circular plasmid DNA. We find that, with the former sample, the measured width of the DNA is about 2 nm, the known DNA diameter, and there is a clear height modulation along the length of the DNA with a periodicity of about 3.4 nm, in excellent agreement with the known pitch of the double helix. This sample preparation strategy is expected to enable higher resolution studies of DNA and DNA binding proteins with FM-AFM than that can presently be achieved.